right now, we assume "find", but it adds any number of
arguments next to that.
change it instead to support any command, where the
assumption is that it would generate a list of files
and directories.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Generated by find, this is a wrapper in place of using
for loops everywhere. This simplification temporarily
increases the amount of code, because we don't do this
a lot, but this will reduce the growth of the build
system code size in future changes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Don't directly call a variable. Call a function that
checks the variable instead.
The new err function also checks whether an exit was
actually done, and exits 1 if not.
If an exit was done by the given function, but the exit
was zero, this is also corrected to perform an exit 1.
This fixes a longstanding design flaw of lbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
this was used alongside the xgcc linking, so that coreboot
trees could specify that another tree was to be downloaded.
since this variable will no longer be used, it should be
removed, to avoid dead code bloat.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the "xtree" variable is used by projects such as u-boot,
to export a CROSS_COMPILE variable specifying prefix for
gnu compilers, and for building the named coreboot tree.
for example, xtree can be "default", which is then the
coreboot tree downloaded, for use of crossgcc.
however, it is also used to symlink identical versions
of crossgcc between coreboot trees. this latter feature
was only needed for fam15h boards which were previously
split between two mostly identical coreboot trees, that
were later merged into a single tree, and this feature
is therefore no longer used.
remove this dead code, to reduce bloat in the build system.
Signed-off-by: Leah Rowe <leah@libreboot.org>
merge it with git_prep, since it's only a small
function and only called from there. the merged
code still makes sense and its purpose is still
quite clear on casual reading.
Signed-off-by: Leah Rowe <leah@libreboot.org>
merge it with git_prep, since it's only a tiny
function and only called from there. the for
loop moved to the if block still makes sense
on casual reading.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the "u" argument can actually be any thing. git_prep
handles git submodules only for single-tree projects,
under any candition, or on multi-tree projects if
the number of arguments to git_prep is above four.
"u" is the 5th argument, meant to enable submodule
downloads. it really doesn't matter what this string
says, so let's just make it as clear as possible.
Signed-off-by: Leah Rowe <leah@libreboot.org>
instead of running pwd all the time, run it once in lib.sh,
and export PWD.
for lbmk-specific use of PWD, use xbmkpwd, which contains
the value of PWD as was set by the pwd utility in lib.sh.
many parts of lbmk rely on pwd, and it *must* be correct.
this change adds basic error handling, since pwd can in
fact return errors in some cases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
PWD could be anything, if the user manually exported
it before running lbmk.
always run pwd instead, to get the real string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
several code lines were condensed together, which
make them less readable. make the code more readable
by having separate commands on separate lines.
i previously did this during my manic build system
audits of 2023 and 2024; condensing lines like this
is overly pedantic and serves no real purpose.
Signed-off-by: Leah Rowe <leah@libreboot.org>
There was also a condition in run_make_command that is now
an OR, where it was an AND, on script/trees, to fix the use
of mixed (and erroneous) OR/AND operators.
I'm planning a much more invasive audit than this. These are
light fixes, intended for Libreboot 20241206 rev8.
Signed-off-by: Leah Rowe <leah@libreboot.org>
When doing e.g. $@ we should use double quotes to prevent globbing.
Thanks go to XRevan86 for pointing this out.
Signed-off-by: Leah Rowe <leah@libreboot.org>
set this variable in the tmpclone function. otherwise,
certain submodules might always download every time,
when handling multiple projects.
Signed-off-by: Leah Rowe <leah@libreboot.org>
in some cases, on a fresh clone, the cached repo already
exists but lbmk tries to download it again. work around
this by checking that the directory exists; it's in the
main if statement, so that the "else" still applies. as
a result, the fallback to a live repo would un-fall back
to doing git-pull if the cached directory exists exists.
if it doesn't seem to make sense, it's because it doesn't.
this whole function needs to be rewritten better.
Signed-off-by: Leah Rowe <leah@libreboot.org>
XBMK_CACHE is now used, instead of hardcoding cache/
this is exported initialised to cache/, if unset.
this means you can set your own directory, and it means
./update release will use the same directory.
this means bandwidth wastage is further avoided.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the || : condition should be used, whereas i just
wrote : by mistake. this was done in a previous change.
fix it now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
a previous change made it more redundant, falling back
on old behaviour (direct downloading, not cached), but
the way it's done means that the function never returns
an error condition in practise.
this patch fixes it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
if doing a retry, the directory may still exist, which
would make git clone yield an error response; the existing
directory will have been the one that failed to reset, so
let's delete it.
the one deleted is not the cache (repo/PROJECT/), thus
otherwise maintaining current behaviour.
Signed-off-by: Leah Rowe <leah@libreboot.org>
normally, a project is cached at repo/PROJECT/, and
cloned from there to the final destination.
errors lead to a calling of $err, but this will result
in a return if done from inside a subshell, of non-zero
value, so use this to re-try with a 6th argument when
calling tmpclone().
in most cases, this fallback will never kick in, but
it will kick in resetting or patching the cached clone
fails; specifically, we are interested in the reset part.
a given project name may change repositories in lbmk at
a given time. if this happens, and the old one is cached,
the overall result of this patch is that lbmk will fall
back to the old behaviour, where git urls are tried
directly, without caching.
Signed-off-by: Leah Rowe <leah@libreboot.org>
actual source code is not scanned, but config directories are
scanned. simply get the checksum of each file under config/
pertaining to a given project/tree, and also for the given
target. coreboot utilities are also handled.
if it changes, in any way, delete and re-build automatically.
such deletions should probably still be done manually, as part
of understanding the build system, but this change should make
the build system much easier to use during development.
Signed-off-by: Leah Rowe <leah@libreboot.org>
re-use repo/project/
this means that single- and multi-tree projects now
have a unified cached git repo location, as per the
new rules, thus saving on disk space usage.
Signed-off-by: Leah Rowe <leah@libreboot.org>
do it based on the URL, e.g. https://review.coreboot.org/coreboot
becomes repo/coreboot
the downside is if you have two projects with repo urls specifying
the same string at the end, but this isn't the case at the moment
and likely won't be the case, but it's a theoretical issue.
this saves on bandwidth when downloading identical submodule repos
between multiple trees within the same multi-tree project
for example, coreboot 3rdparty/vboot is no longer downloaded more
than once, instead cloned locally on subsequent downloads.
if repo/DIR exists, git-pull is attempted, but errors do not result
in a non-zero exit, by design.
Signed-off-by: Leah Rowe <leah@libreboot.org>
some of the variables only initialised in git.sh are
also used in the trees script, which is technically ok
because git.sh is included from the trees script, but
it makes more sense to declare them in the latter.
Signed-off-by: Leah Rowe <leah@libreboot.org>
