Files
lbmk/util/nvmutil/nvmutil.h
2026-03-18 03:53:05 +00:00

551 lines
13 KiB
C

/*
* SPDX-License-Identifier: MIT
*
* Copyright (c) 2022-2026 Leah Rowe <leah@libreboot.org>
*/
/* Use this shorthand in cmd helpers. e.g.
in cmd_setmac function:
check_cmd(cmd_helper_cat);
*/
#ifndef NVMUTIL_H
#define NVMUTIL_H
#define MAX_CMD_LEN 50
#ifndef PATH_LEN
#define PATH_LEN 1024
#endif
#define OFF_ERR 0
#ifndef OFF_RESET
#define OFF_RESET 1
#endif
#ifndef MAX_ZERO_RW_RETRY
#define MAX_ZERO_RW_RETRY 5
#endif
#ifndef HAVE_REAL_PREAD_PWRITE
#define HAVE_REAL_PREAD_PWRITE 0
#endif
#ifndef LOOP_EAGAIN
#define LOOP_EAGAIN 1
#endif
#ifndef LOOP_EINTR
#define LOOP_EINTR 1
#endif
#ifndef _FILE_OFFSET_BITS
#define _FILE_OFFSET_BITS 64
#endif
/*
* Older versions of BSD to the early 2000s
* could compile nvmutil, but pledge was
* added in the 2010s. Therefore, for extra
* portability, we will only pledge/unveil
* on OpenBSD versions that have it.
*/
#if defined(__OpenBSD__) && defined(OpenBSD)
#if OpenBSD >= 604
#ifndef NVMUTIL_UNVEIL
#define NVMUTIL_UNVEIL 1
#endif
#endif
#if OpenBSD >= 509
#ifndef NVMUTIL_PLEDGE
#define NVMUTIL_PLEDGE 1
#endif
#endif
#endif
#ifndef EXIT_FAILURE
#define EXIT_FAILURE 1
#endif
#ifndef EXIT_SUCCESS
#define EXIT_SUCCESS 0
#endif
#ifndef O_ACCMODE
#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
#endif
#ifndef O_BINARY
#define O_BINARY 0
#endif
#ifndef O_EXCL
#define O_EXCL 0
#endif
#ifndef O_CREAT
#define O_CREAT 0
#endif
#ifndef O_NONBLOCK
#define O_NONBLOCK 0
#endif
#ifndef O_CLOEXEC
#define O_CLOEXEC 0
#endif
#ifndef O_NOFOLLOW
#define O_NOFOLLOW 0
#endif
#ifndef FD_CLOEXEC
#define FD_CLOEXEC 0
#endif
/*
* Sizes in bytes:
*/
#define SIZE_1KB 1024
#define SIZE_4KB (4 * SIZE_1KB)
#define SIZE_8KB (8 * SIZE_1KB)
#define SIZE_16KB (16 * SIZE_1KB)
#define SIZE_128KB (128 * SIZE_1KB)
#define GBE_BUF_SIZE (SIZE_128KB)
/*
* First 128 bytes of a GbE part contains
* the regular NVM (Non-Volatile-Memory)
* area. All of these bytes must add up,
* truncated to 0xBABA.
*
* The full GbE region is 4KB, but only
* the first 128 bytes are used here.
*
* There is a second 4KB part with the same
* rules, and it *should* be identical.
*/
#define GBE_WORK_SIZE (SIZE_8KB)
#define GBE_PART_SIZE (GBE_WORK_SIZE >> 1)
#define NVM_CHECKSUM 0xBABA
#define NVM_SIZE 128
#define NVM_WORDS (NVM_SIZE >> 1)
#define NVM_CHECKSUM_WORD (NVM_WORDS - 1)
/*
* Portable macro based on BSD nitems.
* Used to count the number of commands (see below).
*/
#define items(x) (sizeof((x)) / sizeof((x)[0]))
/*
* GbE files can be 8KB, 16KB or 128KB,
* but we only need the two 4KB parts
* from offset zero and offset 64KB in
* a 128KB file, or zero and 8KB in a 16KB
* file, or zero and 4KB in an 8KB file.
*
* The code will handle this properly.
*/
#ifndef X_LONG_MAX
#define X_LONG_MAX ((long)(~((long)1 << (sizeof(long)*CHAR_BIT-1))))
#endif
/*
* Use these for .argc in command[]:
*/
#define ARGC_3 3
#define ARGC_4 4
#define NO_LOOP_EAGAIN 0
#define NO_LOOP_EINTR 0
/*
* Used for checking whether.
* a file is a file via stat().
*
* Portable macro for compatibility
* with older unix e.g. v7 unix (has S_IFREG),
* 4.2bsd (has S_IFMT) or POSIX (has S_ISREG)
*
* Fallback works where S_IFREG == 0100000
* (classic unix bitmask)
*/
#ifndef S_ISREG
#if defined(S_IFMT) && defined(S_IFREG)
#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
#elif defined(S_IFREG)
#define S_ISREG(m) (((m) & S_IFREG) != 0)
#else
#error "can't determine types with stat()"
#endif
#endif
#define IO_READ 0
#define IO_WRITE 1
#define IO_PREAD 2
#define IO_PWRITE 3
/*
* Used as indices for command[]
* MUST be in the same order as entries in command[]
*/
#define CMD_DUMP 0
#define CMD_SETMAC 1
#define CMD_SWAP 2
#define CMD_COPY 3
#define CMD_CAT 4
#define CMD_CAT16 5
#define CMD_CAT128 6
#define ARG_NOPART 0
#define ARG_PART 1
#define SKIP_CHECKSUM_READ 0
#define CHECKSUM_READ 1
#define SKIP_CHECKSUM_WRITE 0
#define CHECKSUM_WRITE 1
/*
* portable timeval
*/
struct x_st_timeval {
long tv_sec;
long tv_usec;
};
struct commands {
unsigned long chk;
char *str;
void (*run)(void);
int argc;
unsigned char arg_part;
unsigned char chksum_read;
unsigned char chksum_write;
unsigned long rw_size; /* within the 4KB GbE part */
int flags; /* e.g. O_RDWR or O_RDONLY */
};
struct macaddr {
char *str; /* set to rmac, or argv string */
char rmac[18]; /* xx:xx:xx:xx:xx:xx */
unsigned short mac_buf[3];
};
struct xfile {
int gbe_fd;
int tmp_fd;
char *tname; /* path of tmp file */
char *fname; /* path of gbe file */
unsigned char *buf; /* work memory for files */
int io_err_gbe; /* intermediary write (verification) */
int io_err_gbe_bin; /* final write (real file) */
int rw_check_err_read[2];
int rw_check_partial_read[2];
int rw_check_bad_part[2];
int post_rw_checksum[2];
dev_t gbe_dev;
ino_t gbe_ino;
dev_t tmp_dev;
ino_t tmp_ino;
off_t gbe_file_size;
off_t gbe_tmp_size;
unsigned long part;
unsigned char part_modified[2];
unsigned char part_valid[2];
unsigned char real_buf[GBE_BUF_SIZE];
unsigned char bufcmp[GBE_BUF_SIZE]; /* compare gbe/tmp/reads */
unsigned char pad[GBE_WORK_SIZE]; /* the file that wouldn't die */
};
/*
* BE CAREFUL when editing this
* to ensure that you also update
* the tables in new_xstate()
*/
struct xstate {
struct commands cmd[7];
struct macaddr mac;
struct xfile f;
char *argv0;
unsigned long i; /* index to cmd[] for current command */
int no_cmd;
/* store size of a struct here.
(can be used to copy old state) */
unsigned long xsize;
/* Cat commands set this.
the cat cmd helpers check it */
int cat;
};
static struct xstate *new_xstate(void);
/*
* Sanitize command tables.
*/
void sanitize_command_list(void);
void sanitize_command_index(unsigned long c);
/*
* Argument handling (user input)
*/
void set_cmd(int argc, char *argv[]);
void set_cmd_args(int argc, char *argv[]);
unsigned long conv_argv_part_num(const char *part_str);
int xstrxcmp(const char *a, const char *b, unsigned long maxlen);
/*
* Prep files for reading
*/
void open_gbe_file(void);
int lock_file(int fd, int flags);
void xopen(int *fd, const char *path, int flags, struct stat *st);
/*
* Read GbE file and verify
* checksums.
*
* After this, we can run commands.
*/
void copy_gbe(void);
void read_file(void);
void read_checksums(void);
int good_checksum(unsigned long partnum);
/*
* Execute user command on GbE data.
* These are stubs that call helpers.
*/
void run_cmd(void);
void check_command_num(unsigned long c);
unsigned char valid_command(unsigned long c);
/*
* Helper functions for command: setmac
*/
void cmd_helper_setmac(void);
void parse_mac_string(void);
unsigned long xstrxlen(const char *scmp, unsigned long maxlen);
void set_mac_byte(unsigned long mac_byte_pos);
void set_mac_nib(unsigned long mac_str_pos,
unsigned long mac_byte_pos, unsigned long mac_nib_pos);
unsigned short hextonum(char ch_s);
unsigned long rlong(void);
unsigned long entropy_jitter(void);
int x_i_gettimeofday(struct x_st_timeval *tv, void *tz);
void write_mac_part(unsigned long partnum);
/*
* Helper functions for command: dump
*/
void cmd_helper_dump(void);
void print_mac_from_nvm(unsigned long partnum);
void hexdump(unsigned long partnum);
/*
* Helper functions for command: swap
*/
void cmd_helper_swap(void);
/*
* Helper functions for command: copy
*/
void cmd_helper_copy(void);
/*
* Helper functions for commands:
* cat, cat16 and cat128
*/
void cmd_helper_cat(void);
void cmd_helper_cat16(void);
void cmd_helper_cat128(void);
void cat(unsigned long nff);
void cat_buf(unsigned char *b);
void check_cmd(void (*fn)(void), const char *name);
void cmd_helper_err(void);
/*
* After command processing, write
* the modified GbE file back.
*
* These are stub functions: check
* below for the actual functions.
*/
void write_gbe_file(void);
void set_checksum(unsigned long part);
unsigned short calculated_checksum(unsigned long p);
/*
* Helper functions for accessing
* the NVM area during operation.
*/
unsigned short nvm_word(unsigned long pos16, unsigned long part);
void set_nvm_word(unsigned long pos16,
unsigned long part, unsigned short val16);
void set_part_modified(unsigned long p);
void check_nvm_bound(unsigned long pos16, unsigned long part);
void check_bin(unsigned long a, const char *a_name);
/*
* Helper functions for stub functions
* that handle GbE file reads/writes.
*/
void rw_gbe_file_part(unsigned long p, int rw_type,
const char *rw_type_str);
void write_to_gbe_bin(void);
int gbe_mv(void);
void check_written_part(unsigned long p);
void report_io_err_rw(void);
int fsync_dir(const char *path);
unsigned char *gbe_mem_offset(unsigned long part, const char *f_op);
off_t gbe_file_offset(unsigned long part, const char *f_op);
off_t gbe_x_offset(unsigned long part, const char *f_op,
const char *d_type, off_t nsize, off_t ncmp);
long rw_gbe_file_exact(int fd, unsigned char *mem, unsigned long nrw,
off_t off, int rw_type);
void check_null_command(const char *c);
long rw_file_exact(int fd, unsigned char *mem, unsigned long len,
off_t off, int rw_type, int loop_eagain, int loop_eintr,
unsigned long max_retries, int off_reset);
long prw(int fd, void *mem, unsigned long nrw,
off_t off, int rw_type, int loop_eagain, int loop_eintr,
int off_reset);
int io_args(int fd, void *mem, unsigned long nrw,
off_t off, int rw_type);
int check_file(int fd, struct stat *st);
long rw_over_nrw(long r, unsigned long nrw);
#if !defined(HAVE_REAL_PREAD_PWRITE) || \
HAVE_REAL_PREAD_PWRITE < 1
off_t lseek_loop(int fd, off_t off,
int whence, int loop_eagain, int loop_eintr);
#endif
int try_err(int loop_err, int errval);
/*
* Error handling and cleanup
*/
void usage(void);
void err(int nvm_errval, const char *msg, ...);
int exit_cleanup(void);
const char *getnvmprogname(void);
/*
* a special kind of hell
*/
char *new_tmpfile(int *fd, int local, const char *path);
int x_i_mkstemp(char *template);
char *x_c_strrchr(const char *s, int c);
/* x_i_rename not suitable
* for atomic writes. kept
* commentted for use in a
* library in the future */
/*
int x_i_rename(const char *src, const char *dst);
*/
char *x_c_tmpdir(void);
int x_i_close(int fd);
void *x_v_memcpy(void *dst,
const void *src, unsigned long n);
int x_i_memcmp(const void *a,
const void *b, unsigned long n);
int x_i_fchmod(int fd, mode_t mode);
int x_try_fdpath(const char *prefix,
int fd, mode_t mode);
unsigned long x_conv_fd(char *buf,
unsigned long n);
int x_i_fsync(int fd);
/* asserts */
/* type asserts */
typedef char static_assert_char_is_8_bits[(CHAR_BIT == 8) ? 1 : -1];
typedef char static_assert_char_is_1[(sizeof(char) == 1) ? 1 : -1];
typedef char static_assert_unsigned_char_is_1[
(sizeof(unsigned char) == 1) ? 1 : -1];
typedef char static_assert_unsigned_short_is_2[
(sizeof(unsigned short) >= 2) ? 1 : -1];
typedef char static_assert_short_is_2[(sizeof(short) >= 2) ? 1 : -1];
typedef char static_assert_unsigned_int_is_4[
(sizeof(unsigned int) >= 4) ? 1 : -1];
typedef char static_assert_unsigned_long_is_4[
(sizeof(unsigned long) >= 4) ? 1 : -1];
typedef char static_assert_int_ge_32[(sizeof(int) >= 4) ? 1 : -1];
typedef char static_assert_twos_complement[
((-1 & 3) == 3) ? 1 : -1
];
typedef char assert_unsigned_long_ptr[
(sizeof(unsigned long) >= sizeof(void *)) ? 1 : -1
];
/*
* We set _FILE_OFFSET_BITS 64, but we only handle
* but we only need smaller files, so require 4-bytes.
* Some operating systems ignore the define, hence assert:
*/
typedef char static_assert_off_t_is_32[(sizeof(off_t) >= 4) ? 1 : -1];
/*
* asserts (variables/defines sanity check)
*/
typedef char assert_argc3[(ARGC_3==3)?1:-1];
typedef char assert_argc4[(ARGC_4==4)?1:-1];
typedef char assert_read[(IO_READ==0)?1:-1];
typedef char assert_write[(IO_WRITE==1)?1:-1];
typedef char assert_pread[(IO_PREAD==2)?1:-1];
typedef char assert_pwrite[(IO_PWRITE==3)?1:-1];
typedef char assert_pathlen[(PATH_LEN>=256)?1:-1];
/* commands */
typedef char assert_cmd_dump[(CMD_DUMP==0)?1:-1];
typedef char assert_cmd_setmac[(CMD_SETMAC==1)?1:-1];
typedef char assert_cmd_swap[(CMD_SWAP==2)?1:-1];
typedef char assert_cmd_copy[(CMD_COPY==3)?1:-1];
typedef char assert_cmd_cat[(CMD_CAT==4)?1:-1];
typedef char assert_cmd_cat16[(CMD_CAT16==5)?1:-1];
typedef char assert_cmd_cat128[(CMD_CAT128==6)?1:-1];
/* bool */
typedef char bool_arg_nopart[(ARG_NOPART==0)?1:-1];
typedef char bool_arg_part[(ARG_PART==1)?1:-1];
typedef char bool_skip_checksum_read[(SKIP_CHECKSUM_READ==0)?1:-1];
typedef char bool_checksum_read[(CHECKSUM_READ==1)?1:-1];
typedef char bool_skip_checksum_write[(SKIP_CHECKSUM_WRITE==0)?1:-1];
typedef char bool_checksum_write[(CHECKSUM_WRITE==1)?1:-1];
typedef char bool_loop_eintr[(LOOP_EINTR==1||LOOP_EINTR==0)?1:-1];
typedef char bool_loop_eagain[(LOOP_EAGAIN==1||LOOP_EAGAIN==0)?1:-1];
typedef char bool_no_loop_eintr[(NO_LOOP_EINTR==0)?1:-1];
typedef char bool_no_loop_eagain[(NO_LOOP_EAGAIN==0)?1:-1];
typedef char bool_off_err[(OFF_ERR==0)?1:-1];
typedef char bool_off_reset[(OFF_RESET==0||OFF_RESET==1)?1:-1];
#endif